On this page
KELI D2008 weighing reports
KELID2008 UDP active reporting reception and variable mapping driver
Open the plugin
Enter “Development Configuration → Collection Configuration”, create a device and select “KELID2008Master” in “Collection Plugin”.
Supported channels and data types
| Channel type | Pre-configuration check |
|---|---|
| UDP | Confirm the local binding address, port and firewall rules, and check the source of the packet. |
| TCP Client | Confirm network reachability of the device IP, port, and gateway to the device. |
| Serial Port | Confirm that the serial port is not occupied by other programs and maintains the same baud rate, data bits, stop bits and parity bits as the device. |
Optional data types: Boolean, Byte, Int16, UInt16, Int32, UInt32, Int64, UInt64, Float, Double, String, Decimal
This list describes types allowed by the plugin editor. Address width, arrays, string length and read/write restrictions still follow this page; it does not mean that every address supports every type.
Address rules
- 1, represents channel 1
Device debug
Enter “Development Configuration → Collection Configuration”, select the current device then open “Protocol Debug” at the top of the workspace.
Functions
| Function | Purpose |
|---|---|
| Last activity | Use Last activity and review the returned result. |
| Variable table | Use Variable table to inspect mapped values, status, counters, recent messages, or the latest result. |
| Message statistics | View received, queued, dropped, and malformed message counts. |
| Message log | View the latest messages received by the current debug session. |
Verify the configuration
Let the field device send a test message; a new reception record should appear in “reception monitoring”, and the corresponding variable value and collection time should be updated synchronously.
Troubleshooting
- There are no new messages in receiving monitoring: Confirm that the field device is actively reporting, and check the monitoring channel, message format, and variable field mapping.
- The serial port device does not respond: Confirm that the serial port is not occupied, and check the baud rate, data bits, stop bits and parity bits.
Related links
- Collection configuration: View channel, device and common variable configuration.
- Plugin Index: Find other collection or data-forward plugins.