On this page
Fuji Command Setting master
Fuji Command Setting protocol PLC address read and write driver
Open the plugin
Enter “Development Configuration → Collection Configuration”, create a device and select “FujiCommandMaster” in “Collection Plugin”.
Supported channels and data types
| Channel type | Pre-configuration check |
|---|---|
| TCP Client | Confirm network reachability of the device IP, port, and gateway to the device. |
| TCP server | Confirm that the local listening address and port are available, and allow on-site devices to actively connect to the gateway. |
Optional data types: Boolean, Byte, Int16, UInt16, Int32, UInt32, Float, String
This list describes types allowed by the plugin editor. Address width, arrays, string length and read/write restrictions still follow this page; it does not mean that every address supports every type.
Address rules
- Fujifilm Command Setting Type Address: B, M, K, F, A, D, S, TS, TR, CS, CR, BD, WL, W9.
- Also supports W21-W26, W30-W109, W120-W123, W125 such as D100, W21.200.
- The number of addresses is calculated by business bytes, and the range of a single read and write is 1 to 251 bytes; Boolean values are read and written by one byte.
Device debug
Enter “Development Configuration → Collection Configuration”, select the current device then open “Protocol Debug” at the top of the workspace.
Functions
| Function | Purpose |
|---|---|
| Read and write | Read a confirmed point and write only to an approved test point. |
| Messages | View sent and received frames, protocol fields, and error details. |
Verify the configuration
Monitor D100 online in the PLC engineering tool, compare its value with the gateway variable and confirm advancing sample times.
Troubleshooting
- Counts are payload bytes, limited to 251 per request; Boolean occupies a byte rather than a packed bit array.
Related links
- Collection configuration: View channel, device and common variable configuration.
- Plugin Index: Find other collection or data-forward plugins.